Safety Precautions

Always supervise children, install near a floor drain, and avoid direct sunlight. Ensure the GFCI plug is tested before each use to prevent electric shock. Do not use in temperatures below 40°F (4°C) and never leave the spa unattended while in operation.

1.1 General Warnings and Guidelines

Always read and understand the entire manual before installation and use. Ensure the spa is placed on a smooth, stable surface to avoid damage. Do not expose the spa to direct sunlight for extended periods. The GFCI plug must be tested before each use to prevent electric shock. Avoid using the spa in temperatures below 40°F (4°C). Never leave the spa unattended while in operation. Supervise children closely at all times. The spa should not be used alone. Ensure the area is well-ventilated, especially during indoor installation, to manage humidity. Follow all safety guidelines to minimize risks associated with water recreation. Regular maintenance is essential for optimal performance and safety.

1.2 Child Safety and Supervision

Children must always be closely supervised when using the spa to prevent accidents. Do not allow children to use the spa without adult supervision. The risk of drowning or injury is increased if children are left unattended. Ensure children understand basic safety rules, such as entering and exiting the spa safely. Avoid letting children play with spa controls or electrical components. The spa is not suitable for children under the age of 3. Always maintain a safe environment around the spa, free from hazards. Supervision is crucial to ensure compliance with safety guidelines and to prevent unintended access to the spa when not in use.

1.3 Weather-Related Warnings

Protect the spa from extreme weather conditions to ensure safe operation and longevity. Do not set up or leave the spa in temperatures below 40°F (4°C) to avoid damage. Direct sunlight exposure for extended periods can cause surface damage or overheating. Install the spa in a shaded area or use a UV-resistant cover when not in use. Avoid operating the spa during thunderstorms to prevent electric shock. Ensure proper ventilation, especially in indoor settings, to prevent excessive humidity buildup. Regularly inspect the spa for weather-related damage and store it according to winterization guidelines if not in use during freezing conditions. Always follow the manufacturer’s recommendations for weather-related care and maintenance.

Installation Requirements

Install on a smooth, flat surface, avoiding direct sunlight. Use a floor drain for water drainage and ensure the area is level to support the spa’s weight.

2.1 Location and Surface Preparation

Ensure the spa is placed on a smooth, flat surface to prevent damage; Avoid direct sunlight to maintain optimal conditions. Use a floor drain for easy water drainage. Check for any sharp objects or uneven ground that could puncture the spa. The surface must be level to support the weight of the spa, water, and users. Indoors, consider humidity and proper ventilation. Ensure the area is large enough for comfortable movement around the spa. Prepare the site before inflating to avoid repositioning the spa once it’s set up. A firm, stable base is essential for safe and efficient operation.

2.2 Indoor vs. Outdoor Installation

For indoor installation, ensure good ventilation to manage humidity. Place the spa on a waterproof floor or protective mat to prevent damage. Outdoor installation is ideal for natural drainage and airflow. Avoid direct sunlight, which can overheat the water. Indoors, verify the space can accommodate the inflated size and allow easy access for maintenance. Outdoors, choose a flat, stable surface away from sharp objects. Ensure the area is clear of debris and level to support the spa’s weight. Consider drainage options for both settings to prevent water accumulation. Always follow the manufacturer’s guidelines for the chosen location to ensure safety and optimal performance.

Operating Instructions

Set up the spa on a flat surface, inflate, and fill with water. Adjust temperature and jets for comfort. Regularly monitor and maintain water quality for safe use.

3.1 Initial Setup and Assembly

Begin by placing the spa on a smooth, level surface, ensuring it is away from direct sunlight and sharp objects. Inflate the tub using the provided pump until it reaches the recommended pressure. Attach the heater and pump units securely, ensuring all connections are tight. Install the filter cartridge as instructed to maintain water quality. Fill the spa with water, ensuring the level is within the recommended range. Before first use, test the GFCI plug to ensure proper function. Follow the manual’s guidelines for initial heating and preparation. Always refer to the manufacturer’s instructions for specific assembly details to ensure safe and proper setup.

3.2 Temperature Control and Heating

The Coleman SaluSpa features a digital control panel for easy temperature adjustment. Set your desired temperature using the provided controls, and the system will gradually heat the water. The heater operates at 11.3A and can raise the temperature by approximately 2-3°F per hour. Ensure the spa is filled to the recommended water level before heating. Avoid leaving the spa unattended while heating, as the water temperature should not exceed 104°F (40°C). Always monitor the heating process and maintain a safe distance from the heater. Regularly check the temperature to prevent overheating, and ensure the spa is used only in ambient temperatures above 40°F (4°C) for optimal performance.

3.3 Jets and Massage Functions

The Coleman SaluSpa is equipped with a soothing massage system, featuring 140 bubble jets that provide a relaxing experience. To activate the jets, press the designated button on the digital control panel. The jets operate on a 6.5A turbo blower, creating a gentle or intense massage depending on your preference. For optimal performance, ensure the water level is adequate and the filter is clean. The massage function can be turned on independently of the heater, allowing you to enjoy the jets at any temperature. Regularly clean the jet openings to maintain proper function and hygiene. Always follow the manual’s guidelines for using the jets and massage functions to ensure safe and enjoyable operation.

Maintenance and Cleaning

Regularly clean the spa surfaces and sanitize to prevent bacteria growth. Check and clean the filter cartridge often. Ensure proper drainage and dry the area after use.

4.1 Regular Cleaning and Sanitization

Regular cleaning is essential to maintain hygiene and functionality. Wash the spa surfaces with mild detergent and rinse thoroughly. Sanitize the water using chlorine or bromine to prevent bacteria growth. Clean the filter cartridge every 1-2 weeks and replace it every 1-2 months. After draining, dry the spa and surrounding area to prevent mold. Always follow the manufacturer’s guidelines for cleaning products to avoid damaging the material. Regular maintenance ensures a safe and enjoyable experience while extending the lifespan of your SaluSpa.

4.2 Filter Maintenance and Replacement

Regular filter maintenance is crucial for optimal performance. Clean the filter cartridge weekly by rinsing with mild detergent and water. Deep clean every 1-2 months using a filter cleaner to remove embedded dirt. Replace the cartridge every 1-2 months or as needed. Ensure the filter is properly seated after cleaning or replacement. Always rinse thoroughly before reinstalling to prevent contamination. Replace the filter immediately if it shows signs of damage or wear. Proper maintenance ensures clean, safe water and prolongs the lifespan of your SaluSpa system. Follow the manufacturer’s guidelines for compatible replacement filters to maintain warranty and performance.

4.3 Winterization and Storage

Proper winterization is essential to protect your SaluSpa from damage. Drain all water thoroughly and clean the spa interior to prevent mold growth. Use a soft cloth to dry the surfaces completely. Store the deflated spa in a dry, cool place, away from direct sunlight and freezing temperatures. Ensure the filter is removed and cleaned before storage. Pack all accessories separately to avoid damage. Check for any signs of wear or damage before storing. Follow the manufacturer’s guidelines for winterization to ensure the longevity of your SaluSpa. Regular inspection during storage can help prevent issues when you resume use in warmer months.

Troubleshooting Common Issues

Common issues include leaks, pump failure, or heater malfunctions. Check all connections and ensure proper installation. Refer to the manual for specific solutions or contact customer support for assistance.

5.1 Heater Malfunction and Solutions

If the heater malfunctions, ensure the GFCI plug is functioning and properly tested. Check for correct voltage supply and verify that the heater is turned on. Inspect the heating element for damage or scale buildup, and clean it if necessary. Ensure water temperature is set correctly and not exceeding the maximum limit. If issues persist, reset the heater or consult a professional. Always refer to the manual for specific troubleshooting steps and safety guidelines to avoid further damage or electrical hazards.

5.2 Jet and Air Blower Problems

Common issues with jets and the air blower include blockages or reduced airflow. Check for debris or mineral buildup in the jets and clean them regularly. Ensure the air blower is functioning properly and not restricted by kinks in the hose. If the jets are not producing adequate bubbles, verify that the air blower is turned on and the water level is sufficient. For persistent issues, inspect the filter for cleanliness and ensure it is properly installed. If the air blower is noisy or malfunctioning, consult the manual for replacement options. Regular maintenance, such as cleaning and inspecting the system, can help prevent these problems and maintain optimal performance.

Accessories and Upgrades

Enhance your SaluSpa experience with compatible accessories like replacement filter cartridges and inflatable headrests. Explore upgraded jets or LED lighting for improved relaxation and ambiance.

6.1 Filter Cartridge Replacement

Regularly replacing the filter cartridge is essential for maintaining clean and safe water in your SaluSpa. The recommended replacement interval is every 1-2 months, depending on usage. Ensure compatibility by using the correct filter type, such as the Bestway 98209800 or similar models. To replace, turn off the pump, drain excess water, and remove the old cartridge. Install the new one securely, following the manufacturer’s instructions. Proper replacement ensures optimal filtration, reducing contaminants and bacteria. Clean the cartridge every 1-2 weeks to maintain performance. Always refer to the manual for specific guidelines tailored to your SaluSpa model.

6.2 Compatible Accessories and Enhancements

Enhance your SaluSpa experience with compatible accessories designed to improve functionality and comfort. The Bestway 98209800 High Flow Filter is a recommended replacement for maintaining clean water. Additional accessories like spa cushions, LED lights, or thermal covers can be installed to elevate your relaxation experience; Ensure all enhancements are compatible with your SaluSpa model to avoid performance issues. Always follow the manufacturer’s guidelines for installation and maintenance. These accessories can improve water quality, energy efficiency, or user comfort, ensuring your spa remains a safe and enjoyable space for years to come.